Laptop Computer Video Port Activation Chart

Most laptop computers require a function key or software command to activate/deactivate the laptop video output signal. The chart below lists the video activation commands for common laptop manufacturers. Many manufacturers use different commands for different models. If none of the commands for your brand listed do not work, consult with the manufacturer for the proper command. With most laptops, the activation/deactivation command acts as a toggle switch: repeat the command to display the image on the internal laptop display, the external display (projector) or both displays simultaneously. In some cases, the simultaneous display setting will not work properly if the native resolution of the projector does not match the native resolution of the laptop LCD display. This means that the internal display of some laptops will need to be turned OFF to achieve optimal image quality on the projector.

Computer	Key Command to Activate Port	Key Command to Deactivate Port
Acer	Ctrl-Alt-ESC while computer boots activates the setup menu; system config; advanced sys config; display device; LCD/CRT FN + F5	Ctrl-Alt-ESC FN + F5
AST	FN + F5 FN + F3 FN + F12 FN + D Ctrl + D Ctrl + FN + D	FN + F5 FN + F3 FN + F12 FN + D Ctrl + D Ctrl + FN + D
AMS	FN + F2	FN + F2
AMT	Set-up; (Advanced) Screen Display; Select CRT	Set-up; (Advanced) Screen Display; Select LCD
AT&T	FN + F3 FN + F6	FN + F3 FN + F6
Advanced Logic Research	Ctrl + Alt + V	Ctrl + Alt + V
Altima	Shift + Ctrl + Alt + C Set-up Conf.Simulscan	Shift + Ctrl + Alt + C Set-up Conf.Simulscan
Ambra	Ctrl + Alt + Esc for set-up screen FN + F2 FN + F5 F2; choose option; F5	Ctrl + Alt + Esc for set-up screen FN + F2 FN + F5 F2; choose option; F5
Amrel	Set-up screen Shift + Ctrl + D FN + F6	Set-up screen Shift + Ctrl + D FN + F6
Apple	See Macintosh	See Macintosh
Aspen	Automatic	Automatic
Austin	Ctrl + Alt + Comma FN + F12	Ctrl + Alt + Comma FN + F12
Award	FN + F6	FN + F6
BCC	Reboot the computer	Reboot the computer
Bondwell	Reboot for LCD/CRT options to appear	Reboot for LCD/CRT options to appear
Canon	FN + F6 Set-up menu FN + F7 Change set-up to CRT	FN + F6 Set-up menu FN + F7 Change set-up to LCD
Chaplet	Select from set-up screen FN + F6 FN + F4	Select from set-up screen FN + F6 FN + F4
Chembook	FN + F6	FN + F6
Chicony	Ctrl + Alt + Esc Automatic	Ctrl + Alt + Esc Automatic
Commax	Ctrl + Alt + # 6 FN + F7 FN + F6	Ctrl + Alt + # 5 FN + F7 FN + F6
Compaq	FN + F4 FN + F2 Automatic Ctrl + Alt + <	FN + F4 FN + F2 Automatic Ctrl + Alt + >
CompuAdd	FN + F3 Set-up select Display LCD/CRT Alt + F for screen set-up option Automatic	FN + F3 Set-up select Display LCD/CRT Alt + F for screen set-up option Automatic
Compudyne	Ctrl + Shift + D Set-up screen FN + F8	Ctrl + Shift + D Set-up screen FN + F8
Data General	Ctrl + Alt + Command 2 CRT/X at DOS prompt	Ctrl + Alt + Command Reboot
DataVue	Ctrl + Shift + M	Ctrl + Shift + M
Data View	Ctrl + Shift + M	Ctrl + Shift + M
DEC	FN + F4 FN + F5 Automatic	FN + F4 FN + F5 Automatic
Dell	FN + F8 FN + F12 Ctrl + Alt + < FN + D Ctrl + Alt + F10	FN + F8 FN + F12 Ctrl + Alt + > FN + D Ctrl + Alt + F10
Digital	Automatic FN + F2	Automatic FN + F2
Dolch	Set dip switch to CRT before boot-up	Set dip switch to LCD before boot-up
Epson	Set dip switch to CRT before boot-up FN + F12	Set dip switch to LCD before boot-up FN + F12
EPS Technologies	FN + F4	FN + F4
Everex	Select from set-up screen FN + F10 Ctrl + Alt + Shift + C	Select from set-up screen FN + F10 Ctrl + Alt + Shift + L
Fujitsu	FN + F10	FN + F10
Gateway	FN + F3 FN + F1 Option in set-up	FN + F3 FN + F1 Option in set-up
Grid	Ctrl + Alt + Tab FN + F2	Ctrl + Alt + Tab FN + F2
Hewlett Packard	FN + F5 FN + F12	FN + F5 FN + F12
Hitachi	FN + F7 FN + F8	FN + F7 FN + F8
Honeywell	FN + F10	FN + F10
Hyundai	Set-up screen option	Set-up screen option
IBM	FN + F7 FN + F1 for set-up Set-up LCD to CRT Ctrl + Alt + S Automatic FN + F2	FN + F7 FN + F1 for set-up Set-up CRT to LCD Ctrl + Alt + S Automatic FN + F2
Infotel	FN + F12	FN + F12
Jetbook	FN + F6 FN + F12	FN + F6 FN + F12
Kaypro	Automatic	Automatic
Kris Tech	FN + F8	FN + F8
Leading Edge	FN + T	FN + T
Macintosh	Select Monitor Icon on Control Strip; Select Resolution to match display device Control Panel folder; Display folder; Activate Video Mirroring; warm reboot Control Panel folder; Monitors; switch primary display by dragging white menu bar to Monitor 2 Many Macintosh computers are not compatible and have no external video port; in these cases there sometimes is a third party device available	Select Monitor Icon on Control Strip; Select Resolution to match display device Control Panel folder; Display folder; Deactivate Video Mirroring; warm reboot Control Panel folder; Monitors; switch primary display by dragging white menu bar to Monitor 1
Magitronic	FN + F4	FN + F4
Mastersport	FN + F2	FN + F1
Micro Express	Automatic	Automatic
Micron	FN + F2 FN + F12	FN + F2 FN + F12
Microslate	Automatic	Automatic
Midwest Micro	FN + F11	FN + F11
Mitsubishi	SW2 On-Off-Off-Off	SW2 Off-On-On-On
NCR	Set-up screen option	Set-up screen option
NEC	FN + F3 FN + F10 FN + F2 Select"Active" from set-up CRT at the DOS prompt	FN + F3 FN + F10 FN + F2 Deselect"Active" from set-up LCD at the DOS prompt
Olivetti	Automatic FN + O FN + Asterisk	Automatic FN + O FN + Asterisk
Packard Bell	FN + F10 FN + F2 Ctrl + Alt + <	FN + F10 FN + F2 Ctrl + Alt + >
Panasonic	FN + F2 Set-up option	FN + F2 Set-up option
ProStar	FN + F6 Ctrl + Alt + S at startup	FN + F6 Ctrl + Alt + S at startup
Sager	FN + F6 FN + F9	FN + F6 FN + F9
Sampo	CTRL + ALT + SHIFT + C	CTRL + ALT + SHIFT + C
Samsung	FN + F4 Set-up screen option FN + F5 FN + F6	FN + F4 Set-up screen option FN + F5 FN + F6
Sanyo	Set-up screen option	Set-up screen option
Sharp	FN + F5 Set dip switch to CRT	FN + F5 Set dip switch to CRT
Sotec	FN + F5 FN + F1	FN + F5 FN + F1
Sun	Ctrl + Shift + M	Ctrl + Shift + M
Tandy	Ctrl + Alt + Insert Set-up option	Ctrl + Alt + Insert Set-up option
Tangent	FN + F5	FN + F5
Texas Instruments	FN + F2 FN + F3 Switch CRT On Press SETUP key on keyboard Type ALTVID at DOS prompt Ctrl + Alt + Setup FN + Setup at DOS prompt - Screen Display = BOTH Ctrl-Alt-Esc Win95 Control Panel; TI SETUP; System Config; Display device; LCD/CRT/both Win3.1 Travelmate Set-up; TI SETUP; System Config; Display device; LCD/CRT/Both FN + F12 FN + F10 FN + F5	FN + F2 FN + F3 Switch CRT On Press SETUP key on keyboard Type ALTVID at DOS prompt Ctrl + Alt + Setup FN + Setup at DOS prompt - Screen Display = LCD Ctrl-Alt-Esc Win95 Control Panel; TI SETUP; System Config; Display device; LCD/CRT/both Win3.1 Travelmate Set-up; TI SETUP; System Config; Display device; LCD/CRT/Both FN + F12 FN + F10 FN + F5
Top-Link	Set-up option FN + F6	Set-up option FN + F6
Toshiba	FN + End Ctrl-Alt-End Automatic Type TSetup at DOS prompt; select display location int/ext/both FN + F5 Ctrl + Alt + End FN + End Ctrl + Alt + End Set-up option	FN + End Ctrl-Alt-End Automatic Type TSetup at DOS prompt; select display location int/ext/both FN + F5 Ctrl + Alt + End FN + End Ctrl + Alt + End Set-up option
Twinhead	FN + F7 FN + F5 Automatic	FN + F7 FN + F5 Automatic
US Logic	FN + F8	FN + F8
Winbook	FN + F6 (simul); FN + F10 (int/ext) Ctrl + Alt + F10 FN + F12 FN + F2 FN + F8	FN + F6 (simul); FN + F10 (int/ext) Ctrl + Alt + F10 FN + F12 FN + F2 FN + F8
Wyse	Automatic	Automatic
Zenith	FN + F10 FN + F7 FN + F2 FN + F1	FN + F10 FN + F7 FN + F2 FN + F1
Zeos	Ctrl + Shift + D FN + F1	Ctrl + Shift + D FN + F1

Education - Laptop Computer Video Port Activation Chart